Ungültige Parameternummer in der Definition von \NewCount

Ungültige Parameternummer in der Definition von \NewCount

Ich schreibe also ein riesiges Dokument (es ist ziemlich lang und ich hänge nicht das ganze an, aber wenn es nötig ist, kann ich es auch hinzufügen). Indem ich nur einschließe, aufliste oder aufzähle, wie

% Above text has Lots of text above with citations, drawing, plots, graphs, svg files etc

\begin{itemize} 
\item Hi all 
\end{itemize}

% Below text also has Lots of text above with citations, drawing, plots, graphs, svg files etc
 

dann erhalte ich die folgenden Fehler:


<to be read again> 
                   1
l.430     \item
                Hi All
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I'm going to assume that you meant ##.
Undefined control sequence.
<argument> \blx@bbl@data 
                         
l.430     \item
                Hi All
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

)
Incomplete \iffalse; all text was ignored after line 430.
<inserted text> 
                \fi 
<*> LCR.tex
           
The file ended while I was skipping conditional text.
This kind of error happens when you say `\if...' and forget
the matching `\fi'. I've inserted a `\fi'; this might work.

! Emergency stop.
<*> LCR.tex
           
*** (job aborted, no legal \end found)

 
Here is how much of TeX's memory you used:
 48270 strings out of 475237
 1125062 string characters out of 5764570
 2053591 words of memory out of 5000000
 68616 multiletter control sequences out of 15000+600000
 570557 words of font info for 85 fonts, out of 8000000 for 9000
 1141 hyphenation exceptions out of 8191
 128i,16n,124p,1680b,2229s stack positions out of 10000i,1000n,20000p,200000b,200000s
!  ==> Fatal error occurred, no output PDF file produced!

In one of the folders in overleaf, I have a file which kind of serves as a preamble 

% MASTER OF SCIENCE THESIS TEMPLATE 2018
% TEMPLATE AUTHOR: TOMAS CASSANELLI

% INITIAL CONFIGURATION
\documentclass[a4paper, 11pt, twoside]{book}

\usepackage[              % Left and right margins
    DIV=11,               % You can play with these numbers for a better
    BCOR=2mm,             % reference look into KOMA-Script CTAN manual
    headinclude=true,
    footinclude=false,
    paper=A4
    ]{typearea}

% BASIC THESIS INFORMATION
\def\title{Thesis not too long title}
\def\thesisauthor{Your name goes here}

% commands below work only for twoside option of \documentclass
\makeatletter
\if@twoside
    \newlength{\textblockoffset}
    \setlength{\textblockoffset}{10mm}
    \addtolength{\hoffset}{\textblockoffset}
    \addtolength{\evensidemargin}{-2.0\textblockoffset}
\fi
\makeatother

% PACKAGES
\usepackage{amsmath,amssymb,mathrsfs}  % Basic math packages
\usepackage{subfiles}
\usepackage[sorting=none]{biblatex} %Imports biblatex package
\addbibresource{references/bibfile_thesis.bib} %Import the bibliography file                  % A&A bibliograsphy style
\usepackage{svg}
\usepackage[svgpath=./figures/]{svg}
\usepackage{upgreek}                   % More greek letters
\usepackage{enumerate}
\usepackage{commath}
\usepackage{forloop}
\usepackage{blindtext}
\usepackage{mathtools}
\usepackage[usenames, dvipsnames]{color}
\usepackage{physics}
\usepackage[thinc]{esdiff}


% to know the page width and adjust the image size!
\usepackage{printlen} % \uselengthunit{in}\printlength{\textwidth}
\usepackage[allcolors=blue]{hyperref}
% TABLE PACKAGES
\usepackage{etoolbox}
\BeforeBeginEnvironment{tabular}{\small}
\usepackage{booktabs}
\usepackage{multirow}
\usepackage{hyperref}
\hypersetup{citecolor={blue}}  

% IMAGES PACAKGES
\usepackage{graphicx}
\usepackage[font=small]{caption}
\newtheorem{theorem}{Theorem}
\graphicspath{{../figures/}}

% TIKZ & PGFPLOTS
\usepackage{tikz}
\usepackage{tikz-3dplot}
\usepackage{pgfplots}
\pgfplotsset{compat=1.14}
\usetikzlibrary{
    calc,
    patterns,
    circuits.logic.US,
    circuits.ee.IEC,
    intersections,
    angles,
    quotes,
    arrows,
    shapes,
    }

% COLOR BOX
\usepackage{tcolorbox}
\newtcolorbox{note}{
    fontupper=\small,
    title=Note,
    arc=0mm,
    sharp corners,
    fonttitle=\bfseries\small
    }
\usepackage{enumerate}
\usepackage{enumitem}% for simpler customization of used lists
\setlist[itemize]{label= --}
\MakeRobust\@centercr
% DEDICATION PAGE CONFIGURATION
\newenvironment{dedication}
  {\clearpage
   \thispagestyle{empty}
   \vspace*{\stretch{1}}
   \itshape
   \raggedleft}
  {\par
   \vspace{\stretch{3}}
   \clearpage}

% PDF CONFIGURATION
\usepackage{hyperref}
\hypersetup{
    pdffitwindow=true,
    pdfstartview={FitH},
    pdftitle={MSc Thesis},                    % TITLE
    pdfauthor={Your name goes here},          % AUTHOR
    pdfsubject={\title},                      % DOCUMENT SUBJECT
    pdfcreator={Tomas Cassanelli},            % CREATOR
    pdfproducer={\thesisauthor},              % PRODUCER
    pdfkeywords={Astronomy, Astrophysics},
    pdfnewwindow=true,
    colorlinks=true,                          % COMMENT FOR BLACK LINKS
    linkcolor=red,
    citecolor=blue,
    urlcolor=RoyalBlue
    }

% DRAFT MODE: uncomment this for draft mode!
% \usepackage[printwatermark]{xwatermark}
% \newwatermark[allpages,color=red!10,angle=45,scale=3,xpos=0,ypos=0]{DRAFT}

\begin{document}

    \frontmatter  % front and main matter to make roman numbers in between.

    % FIRST PAGE TITLE
    \pdfbookmark[0]{Title page}{title}
    \begin{titlepage}
        \begin{center}
            \vspace{0.5cm}

            \Huge
            \textbf{\title}

            \vspace{0.5cm}
            \LARGE
            % Thesis Subtitleb

            \vspace{1.5cm}

            \textbf{\thesisauthor}

            \vspace{4cm}

            \begin{center}
                \includegraphics{logo_aifa}
            \end{center}

            \vfill

            Masterarbeit in Astrophysik\\
            angefertigt im Argelander Institut f\"ur Astronomie

            \vspace{0.5cm}

            \Large
            vorgelegt der \\
            Mathematisch-Naturwissenschalftlichen Fakult\"at \\
            der \\
            Rheinische Friedrich-Wilhelms-Universit\"at Bonn\\
            Deutschland

            \vspace{0.5cm}

            \LARGE
            \today

        \end{center}
    \end{titlepage}

    \newpage  % Inserting empty page
    \mbox{}
    \thispagestyle{empty}

    % DEDICATION
    \begin{dedication}
    \pdfbookmark[0]{Dedication}{dedication}
    To Google and Wikipedia
    \end{dedication}

    \newpage  % Inserting empty page
    \mbox{}
    \thispagestyle{empty}

    % SIGNATURE PAGE
    \newpage
    \thispagestyle{empty}
    \pdfbookmark[0]{Statement}{statement}
    \par\vspace*{\fill}
    \noindent I hereby declare that this thesis was formulated by myself and that no sources or tools than those cited were used.
    \vspace{0.8cm}

    \begin{center}
        \begin{tabular}{c@{\hskip 1in}c}
            \makebox[2in]{\hrulefill} & \makebox[2in]{\hrulefill}\\
            Date & Signature\\
        \end{tabular}
    \end{center}
    \vspace{1cm}

    \noindent 1. Gutachter: Prof. Dr. (Professor Name 1) \\
    \noindent 2. Gutachter: Prof. Dr. (Professor Name 2)

    \newpage  % Inserting empty page
    \mbox{}
    \thispagestyle{empty}

    % ABSTRACT
    \subfile{../abstract/abstract}

    % ACKNOWLEDGMENTS
    \subfile{../acknowledgments/acknowledgments}

    % TABLE OF CONTENT
    \cleardoublepage
    \phantomsection
    \addcontentsline{toc}{chapter}{Contents}
    \tableofcontents

    % LIST OF FIGURES
    \cleardoublepage
    \phantomsection
    \addcontentsline{toc}{chapter}{List of Figures}
    \listoffigures

    % LIST OF TABLES
    \cleardoublepage
    \phantomsection
    \addcontentsline{toc}{chapter}{List of Tables}
    \listoftables

    \newpage  % Inserting empty page
    \mbox{}
    \thispagestyle{empty}

    \mainmatter  % front and main matter to make roman numbers in between

    % BODY
    \subfile{../chapter1/chapter1.tex}
    \subfile{../chapter2/LCR.tex}
    %\subfile{../chapter3/chapter3}
    %\subfile{../chapter4/chapter4}
    %\subfile{../chapter5/chapter5}

    % APPENDICES
    \appendix
    \subfile{../appendix1/appendix1}
    %\subfile{../appendix2/appendix2}
    %\subfile{../appendix3/appendix3}

    % REFERENCES
    % If you are using a windows machine and the bibliography doesn't work
    % remove the extension for .bst and .bib files here!
    \bibliographystyle{../references/bibstyle_aa.bst}
    \bibliography{../references/bibfile_thesis.bib}
    \phantomsection
    \addcontentsline{toc}{chapter}{Bibliography}

\end{document}

Wissen Sie, wo der Fehler liegen könnte? Wenn Sie die ganze Datei benötigen, kann ich sie Ihnen ebenfalls zukommen lassen und werde detailliert beschreiben, wie Sie sie öffnen müssen. BEARBEITET: https://drive.google.com/file/d/1EX9KAVjS6ms3PL0odVWy947Hsr0Uu5xd/view?usp=drive_link

Dies ist der Link zum Google Drive, auf dem sich meine Datei befindet. Ich habe mich entschieden, meine gesamte Datei hinzuzufügen, da ich einen kleinen Teil meines Codes, der das gesamte Problem darstellen würde, nicht veröffentlichen kann. Öffnen Sie hier Kapitel 2, klicken Sie auf LCR.tex und führen Sie es aus. Dann wird der Fehler angezeigt.

verwandte Informationen