Ich habe einen dieser kleinen, billigen drahtlosen USB-Sticks gekauft. Ubuntu konnte ihn nicht finden und eine freundliche Person auf dieser Site lieferte ein Skript zur Einrichtung. Ich musste dies nach den meisten oder allen Neustarts ausführen. Ich habe das Verfahren heute durchgespielt. Es erzeugt Fehler und funktioniert länger. Irgendwelche Vorschläge?
Skript
#!/bin/bash
cd rtl8812AU
make clean
make
make install
modprobe 8812au
**bin bash**
#!/bin/bash
#
# Copyright (c) 2012
#
# Authors: Wild Man, Krytarik
# Helpers: chili555
#
# This script gathers the infos necessary for troubleshooting a wireless
# connection and saves them in a text file, wrapping it in an archive if it
# exceeds the 19.5 kB size limit for ".txt" attachments on the Ubuntu Forums.
#
##############################################################################
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
SCRIPTDATE="2017-03-25 08:04 +0100"
FILEBASE="wireless-info"
OUTPUTDIR="$PWD"
OUTPUTDIRFB="/tmp"
MODMATCHES="(air|ar5|at7|ath[^3]?|b43|bcma|brcm|carl|ipw|iwl|ndis|r(818|8192[eu]|871|92su)|8(188|189|192|723|812)[acde][esu]|rt[23567]|rtl|ssb|wl|(cfg|mac)80211)"
LSMODMATCHES="(wmi|(dell|ideapad)[-_]laptop)"
IFACEMATCHES="(wlan[0-9]|eth[0-9])"
DMESGMATCHES="(firmware|[nN]etwork)"
NMPROFMATCHES="\(\[connection\]\|id=\|type=\|permissions=\|autoconnect=\|\[802-11-wireless\]\|\[wifi\]\|ssid=\|bssid=\|mac-address\(-blacklist\)\?=\|mtu=\|\[802-1x\]\|[[:graph:]]*ca-certs\?=\|\[ipv[46]\]\|method=\)"
DMESGEXCL="apparmor|(cfg|mac)80211"
MODINFOEXCL="alias"
MODPROBEXCL="(alsa-base|blacklist-(firewire|framebuffer|modem|oss|watchdog)|fglrx|nvidia|fbdev|bumblebee)"
PMUTILSEXCL="/etc/pm/(power.d/(95hdparm-apm|intel-audio-powersave|sata_alpm)|sleep.d/(10_grub-common|10_unattended-upgrades.*|novatel_3g.*))"
NETMGRNAMES=("NetworkManager" "Wicd" "ConnMan")
NETMGRPATHS=("/usr/sbin/NetworkManager" "/usr/sbin/wicd" "/usr/sbin/connmand")
DEC2BI=({0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1})
DEC2HEX=($(printf "%02x " {0..255}))
export LANG="en_US.UTF-8"
export LANGUAGE="en_US:en"
export LC_ALL="en_US.UTF-8"
if [ -t 0 ]; then
DIALOGAPP="terminal"
DIALOGBREAK=" "
TERMOUT="yes"
elif [ -x /usr/bin/zenity ]; then
DIALOGAPP="zenity"
DIALOGBREAK="\n"
elif [ -x /usr/bin/kdialog ]; then
DIALOGAPP="kdialog"
DIALOGBREAK="\n"
else
exit 1
fi
if [ -t 0 ]; then
SUDO="sudo"
elif [ -x /usr/bin/pkexec ]; then
SUDO="pkexec"
elif [ -x /usr/bin/gksudo ]; then
SUDO="gksudo"
GKSUDO="yes"
elif [ -x /usr/bin/kdesudo ]; then
SUDO="kdesudo"
KDESUDO="yes"
KDESUDOCMT=" needs administrative privileges. Please enter your password."
fi
dialog_info () {
case $DIALOGAPP in
terminal)
printf "%b\n" "$1"
;;
zenity)
zenity --info --text="$1"
;;
kdialog)
kdialog --msgbox "$1"
;;
esac
}
dialog_error () {
case $DIALOGAPP in
terminal)
printf "%b\n" "$1" >&2
;;
zenity)
zenity --error --text="$1"
;;
kdialog)
kdialog --error "$1"
;;
esac
}
dialog_question () {
case $DIALOGAPP in
terminal)
local INPUT
read -r -p "$1 [Y/n]: " INPUT
echo "${INPUT,,}"
;;
zenity)
zenity --question --text="$1" || echo "no"
;;
kdialog)
kdialog --yesno "$1" || echo "no"
;;
esac
}
ip6-mac () {
for MAC in "$@"; do
OCT1BI=${DEC2BI[0x${MAC:0:2}]}
OCT1BI7=$((${OCT1BI:6:1} - 1))
OCT1BIM="${OCT1BI:0:6}${OCT1BI7#-}${OCT1BI:7}"
IP6S+=${IP6S:+$'\n'}"${DEC2HEX[2#$OCT1BIM]}${MAC:3:2}:${MAC:6:2}ff:fe${MAC:9:2}:${MAC:12:2}${MAC:15:2}"
done
sed 's/\(^\|:\)0\+\([[:alnum:]]\)/\1\2/g;s/^\([0:]\+\)/\\(::\\|\1\\)/' <<< "$IP6S"
}
exec 3>&1 4>&2
exec 1> "$OUTPUTDIR/$FILEBASE.txt" || {
dialog_error "${TERMOUT+\n}Cannot write output file in \"$OUTPUTDIR\",${DIALOGBREAK}trying in \"$OUTPUTDIRFB\" instead.${TERMOUT+\n}"
OUTPUTDIR="$OUTPUTDIRFB"
exec 1> "$OUTPUTDIR/$FILEBASE.txt" || {
dialog_error "${TERMOUT+\n}Cannot write output file in \"$OUTPUTDIR\" either, aborting.${TERMOUT+\n}"
exit 1
}
}
exec 2>&1
printf "\n########## wireless info START ##########\n\n"
REPORTDATE=$(date +"%d %b %Y %H:%M %Z %z")
SCRIPTDATE=$(date -u -d "$SCRIPTDATE" +"%d %b %Y %H:%M %Z %z")
LASTBOOTDT=$(last -FRn 1 reboot | sed -n 's/.*system boot[ ]\+\(.\+\) - .*/\1/p')
LASTBOOTDT=$(date -d "$LASTBOOTDT" +"%d %b %Y %H:%M %Z %z")
printf "Report from: %s\n\n" "$REPORTDATE"
printf "Booted last: %s\n\n" "$LASTBOOTDT"
printf "Script from: %s\n" "$SCRIPTDATE"
printf "\n##### release ###########################\n\n"
lsb_release -idrc
printf "\n##### kernel ############################\n\n"
uname -srvmpio
echo
sed 's/root=[^ ]*//;s/[ ]\+/, /g;s/^BOOT_IMAGE=[^ ]*/Parameters:/' /proc/cmdline
printf "\n##### desktop ###########################\n\n"
if [ -n "$DESKTOP_SESSION" ]; then
DESKTOP="$DESKTOP_SESSION"
else
DESKTOP=$(sed -n 's/^Session=\(.\+\)$/\1/p' "$HOME/.dmrc")
DESKDMRC=" (from ~/.dmrc)"
fi
if [ -n "$DESKTOP" ]; then
if [ -f "/usr/share/xsessions/$DESKTOP.desktop" ]; then
DESKTOP=$(sed -n 's/^Name=\(.\+\)$/\1/p' "/usr/share/xsessions/$DESKTOP.desktop")
fi
echo "${DESKTOP/ Session/}${DESKDMRC}"
else
printf "\nCould not be determined.\n"
fi
printf "\n##### lspci #############################\n\n"
lspci -nnk | grep -iA 2 '^[^[:space:]].*net' | sed '/^--$/d; /^[^[:space:]]/ i\\'
printf "\n##### lsusb #############################\n\n"
lsusb
printf "\n##### PCMCIA card info ##################\n\n"
if [ -x /sbin/pccardctl ]; then
pccardctl info
else
echo "'pccardctl' is not installed (package \"pcmciautils\")."
fi
printf "\n##### rfkill ############################\n\n"
rfkill list all
printf "\n##### lsmod #############################\n\n"
LSMOD=$(lsmod | egrep "(^|[[:punct:] ])($MODMATCHES|$LSMODMATCHES)[^[:punct:] ]*([[:punct:] ]|$)")
echo "$LSMOD"
printf "\n##### interfaces ########################\n\n"
sed '/^#/d;s/^wpa-psk [[:graph:]]\+/wpa-psk <WPA key removed>/' /etc/network/interfaces
printf "\n##### ifconfig ##########################\n\n"
if [ -x /sbin/ifconfig ]; then
IFCONFIG=$(ifconfig -a)
else
IFCONFIG=$(ip address show)
fi
echo "$IFCONFIG"
IFCONFIG=$(sed -n '1h; 1!H; ${g;s/\n /\\ /g;p}' <<< "$IFCONFIG")
IFACESETH=($(sed -n 's/^\([^ ]\+\)[ ]\+Link encap:Ethernet.*/\1/p; s#^[0-9]\+: \([^ :]\+\):.* link/ether.*#\1#p' <<< "$IFCONFIG"))
if (( ${#IFACESETH[@]} > 0 )); then
IFETHMATCHES=${IFACESETH[@]}
IFACEMATCHES="($IFACEMATCHES|(${IFETHMATCHES// /|}))"
fi
printf "\n##### iwconfig ##########################\n\n"
iwconfig
printf "\n##### route #############################\n\n"
if [ -x /sbin/route ]; then
route -n
else
ip route show
fi
printf "\n##### resolv.conf #######################\n\n"
grep -v '^#' /etc/resolv.conf
printf "\n##### network managers ##################\n\n"
printf "Installed:\n\n"
for NETMGRNR in "${!NETMGRPATHS[@]}"; do
if [ -f "${NETMGRPATHS[$NETMGRNR]}" ]; then
NETMGRINST+=("${NETMGRNAMES[$NETMGRNR]}")
fi
done
printf "\t%s\n" "${NETMGRINST[@]:-None found.}"
NETMGRMATCHES=${NETMGRPATHS[@]/#*\//|}
NETMGRMATCHES=${NETMGRMATCHES// |/|}
NETMGRMATCHES="(${NETMGRMATCHES#|})"
printf "\nRunning:\n\n"
ps -ef | egrep "( |/)$NETMGRMATCHES($| )" || printf "\tNone found.\n"
printf "\n##### NetworkManager info ###############\n\n"
if [ -x /usr/bin/nm-tool ]; then
nm-tool
elif [ -x /usr/bin/nmcli ]; then
nmcli -f all device show | sed '/^GENERAL.DEVICE:[ ]\+lo$/,/^$/d; /^AP\[[0-9]\+\]\./d'
echo
nmcli -f SSID,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,ACTIVE,IN-USE device wifi list
else
echo "NetworkManager is not installed (package \"network-manager\")."
fi
printf "\n##### NetworkManager.state ##############\n\n"
cat -s /var/lib/NetworkManager/NetworkManager.state
printf "\n##### NetworkManager.conf ###############\n\n"
grep -v '^#' /etc/NetworkManager/NetworkManager.conf
if [ -f /etc/NetworkManager/nm-system-settings.conf ]; then
printf "\nnm-system-settings.conf (used up to Ubuntu 10.04):\n\n"
grep -v '^#' /etc/NetworkManager/nm-system-settings.conf
fi
printf "\n##### NetworkManager profiles ###########\n\n"
if [ -d /etc/NetworkManager/system-connections ]; then
if [ -n "$SUDO" ]; then
trap "" 2 3
NMPROFILES=$(find /etc/NetworkManager/system-connections -maxdepth 1 -type f -exec $SUDO${GKSUDO+ -D grep --}${KDESUDO+ -d --comment "<b>grep</b>$KDESUDOCMT" --} grep -vH '^$' {} +) && SUDOSUCCESS="yes" || SUDOSUCCESS="no"
trap 2 3
if [ "$SUDOSUCCESS" = "yes" ]; then
ORIGIFS="$IFS"
IFS=$'\n'
for NMWLPRFFILE in $(sed -n 's/^\(.\+\):type=\(802-11-wireless\|wifi\).*$/\1/p' <<< "$NMPROFILES"); do
NMWLPRFFLPERMS=$(stat -c "%a %U" "$NMWLPRFFILE")
NMWLPROFILE=($(sed -n "s;^$NMWLPRFFILE:\($NMPROFMATCHES.*\)$;\1 |;p" <<< "$NMPROFILES"))
NMWLPROFSOUT+="[[$NMWLPRFFILE]] ($NMWLPRFFLPERMS)"$'\n'"${NMWLPROFILE[@]}"$'\n\n'
done
IFS="$ORIGIFS"
sed 's# | \[#\n\[#g;s#\] |#\]#g;s/ |$//' <<< "$NMWLPROFSOUT" | sed '/^\[[^]]*\]$/d'
else
printf "\nAcquisition of admin privileges failed.\n"
fi
else
echo "No way to acquire admin privileges found."
fi
else
echo "No NetworkManager profiles found."
fi
printf "\n##### iw reg get ########################\n\n"
if [ -x /sbin/iw ]; then
if IWREGGET=$(iw reg get 2>&1) && [ -f /etc/timezone ]; then
REGION=$(cat /etc/timezone)
printf "Region: %s (based on set time zone)\n\n" "$REGION"
fi
echo "$IWREGGET"
else
echo "'iw' is not installed (package \"iw\")."
fi
printf "\n##### iwlist channels ###################\n\n"
if [ -x /sbin/iwlist ]; then
iwlist chan
else
echo "'iwlist' is not installed (package \"wireless-tools\")."
fi
printf "\n##### iwlist scan #######################\n\n"
if [ -x /sbin/iwlist ]; then
if [ -n "$SUDO" ]; then
trap "" 2 3
IWLISTSCAN=$($SUDO${KDESUDO+ -d} iwlist scan) && SUDOSUCCESS="yes" || SUDOSUCCESS="no"
trap 2 3
if [ "$SUDOSUCCESS" = "yes" ]; then
if [[ $IWLISTSCAN = *Frequency:* ]]; then
printf "Channel occupancy:\n\n"
grep '^[ ]*Frequency:' <<< "$IWLISTSCAN" | sort | uniq -c | sed 's/^[ ]\+\([ ][0-9]\+\)[ ]\+/ \1 APs on /'
echo
fi
grep -v '^[ ]*IE: Unknown:' <<< "$IWLISTSCAN"
else
printf "\nAcquisition of admin privileges failed.\n"
fi
else
echo "No way to acquire admin privileges found."
fi
else
echo "'iwlist' is not installed (package \"wireless-tools\")."
fi
printf "\n##### module infos ######################\n\n"
MODULES=$(egrep -o "^$MODMATCHES[^ ]*" <<< "$LSMOD")
for MODULE in $MODULES; do
MODINFO=$(modinfo $MODULE | egrep -v "^$MODINFOEXCL:")
printf "[%s]\n%s\n\n" "$MODULE" "$MODINFO"
done
printf "\n##### module parameters #################\n\n"
for MODULE in $MODULES; do
if [ -d /sys/module/$MODULE/parameters ]; then
MODPARAMS=$(grep -H '^[[:graph:]]' /sys/module/$MODULE/parameters/* | sed 's#^.*/##;s/:/: /')
printf "[%s]\n%s\n\n" "$MODULE" "$MODPARAMS"
fi
done
printf "\n##### /etc/modules ######################\n\n"
grep -v '^#' /etc/modules
printf "\n##### modprobe options ##################\n\n"
for MODPROBEFILE in $(find /etc/modprobe.{conf,d} -name "*.conf" -regextype posix-egrep -not -regex ".*$MODPROBEXCL.*" 2> /dev/null | sort); do
MODPROBEOPTS=$(egrep -v '^(#|$)' $MODPROBEFILE)
if [ -n "$MODPROBEOPTS" ]; then
printf "[%s]\n%s\n\n" "$MODPROBEFILE" "$MODPROBEOPTS"
fi
done
printf "\n##### rc.local ##########################\n\n"
grep -v '^#' /etc/rc.local
printf "\n##### pm-utils ##########################\n\n"
for PMUTILSFILE in $(find /etc/pm/*.d \( -type f -o -type l \) -regextype posix-egrep -not -regex "$PMUTILSEXCL" | sort); do
PMUTFLCONT=$(egrep -v '^(#|$)' $PMUTILSFILE)
if [ -n "$PMUTFLCONT" ]; then
PMUTFLPERMS=$(stat -c "%a %U" $PMUTILSFILE)
printf "[%s] (%s)\n%s\n\n" "$PMUTILSFILE" "$PMUTFLPERMS" "$PMUTFLCONT"
fi
done
printf "\n##### udev rules ########################\n\n"
for UDEVRLFILE in $(find /etc/udev/rules.d -name "*net*.rules" | sort); do
UDEVRULES=$(grep -B1 '^[^#]' $UDEVRLFILE | egrep -v '^(--)?$')
if [ -n "$UDEVRULES" ]; then
printf "[%s]\n%s\n\n" "$UDEVRLFILE" "$UDEVRULES"
fi
done
printf "\n##### dmesg #############################\n\n"
dmesg | tail -n 100 | egrep "[[:punct:] ]($MODMATCHES|$IFACEMATCHES|$DMESGMATCHES)[^[:punct:] ]*[[:punct:] ]" | egrep -v "$DMESGEXCL" | uniq -cf 2 | sed 's/^[ ]\+1[ ]\+//;s/^[ ]\+\([0-9]\+\)[ ]\+\(.\+\)$/\2 (repeated \1 times)/'
printf "\n########## wireless info END ############\n\n"
exec 2>&4 4>&-
exec 1>&3 3>&-
##### MAC address masking #####
RESULTS=$(cat -s "$OUTPUTDIR/$FILEBASE.txt")$'\n'
ORIGIFS="$IFS"
IFS=$'\n'
IFACESIDS=($(sed -n "/\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}/ {/\(00:\)\{5\}00/! {s/^\([^ ]\+\)[ ]\+.*HWaddr.*/'\1'/p; s/^[0-9]\+: \([^ :]\+\):.*/'\1'/p}}" <<< "$IFCONFIG"))
IFACESMACS=($(sed -n '/\(00:\)\{5\}00/! s#.*\(HWaddr\|link/[^ ]\+\) \(\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}\).*#\2#p' <<< "$IFCONFIG"))
IFACESIP6S=($(ip6-mac "${IFACESMACS[@]}"))
WLAPSIWLIDS=($(sed -n "/^[ ]*Cell [0-9]\+/,/^[ ]*ESSID:/ {/^[ ]*Cell [0-9]\+/h; /^[ ]*ESSID:/ {H;g;s/^[ ]*Cell 0\?\([0-9]\+\).*ESSID:\"\(.*\)\"$/'\2' [AC\1]/p}}" <<< "$IWLISTSCAN"))
WLAPSIWLMACS=($(sed -n 's/^[ ]*Cell [0-9]\+.*Address: \([^ ]\+\)/\1/p' <<< "$IWLISTSCAN"))
WLAPSIWLIP6S=($(ip6-mac "${WLAPSIWLMACS[@]}"))
WLAPSNMRAW=$(sed -n '/^##### NetworkManager info #####/,/^##### / {/^[ ]*Wireless Access Points/,/^$/ {/Wireless Access Points/d;s/^[ ]\+\*\?//;s/:[ ]\+/\t/;p}; /^SSID[ ]\+BSSID[ ]\+/,/^$/ {/^SSID[ ]\{2,\}BSSID[ ]\{2,\}/d;s/[ ]\{2,\}/\t/;p}}' <<< "$RESULTS")
WLAPSNMIDS=($(awk -F '\t' '{print "'\''" $1 "'\''"}' <<< "$WLAPSNMRAW"))
WLAPSNMMACS=($(grep -o '\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}' <<< "$WLAPSNMRAW"))
WLAPSNMIP6S=($(ip6-mac "${WLAPSNMMACS[@]}"))
IFS="$ORIGIFS"
for IFACENR in "${!IFACESMACS[@]}"; do
MACMASKSED+="s;${IFACESMACS[$IFACENR]};<MAC ${IFACESIDS[$IFACENR]} [IF$(($IFACENR + 1))]>;I;"
MACMASKSED+=" /${IFACESIP6S[$IFACENR]}/ s;${IFACESIP6S[$IFACENR]/#\\(::/\(};<IP6 ${IFACESIDS[$IFACENR]} [IF$(($IFACENR + 1))]>;I;"
IFACEMACC=${IFACESMACS[$IFACENR]//:/}
if [[ ${IFACESIDS[$IFACENR],,} =~ ${IFACEMACC,,} ]]; then
MACMASKSED+="s;\(${IFACESIDS[$IFACENR]:1:3}\)$IFACEMACC;\1<IF from MAC [IF$(($IFACENR + 1))]>;Ig;"
fi
done
for WLAPIWLNR in "${!WLAPSIWLMACS[@]}"; do
MACMASKSED+="s;${WLAPSIWLMACS[$WLAPIWLNR]};<MAC ${WLAPSIWLIDS[$WLAPIWLNR]}>;I;"
MACMASKSED+=" /${WLAPSIWLIP6S[$WLAPIWLNR]}/ s;${WLAPSIWLIP6S[$WLAPIWLNR]/#\\(::/\(};<IP6 ${WLAPSIWLIDS[$WLAPIWLNR]}>;I;"
done
for WLAPNMNR in "${!WLAPSNMMACS[@]}"; do
MACMASKSED+="s;${WLAPSNMMACS[$WLAPNMNR]};<MAC ${WLAPSNMIDS[$WLAPNMNR]} [AN$(($WLAPNMNR + 1))]>;I;"
MACMASKSED+=" /${WLAPSNMIP6S[$WLAPNMNR]}/ s;${WLAPSNMIP6S[$WLAPNMNR]/#\\(::/\(};<IP6 ${WLAPSNMIDS[$WLAPNMNR]} [AN$(($WLAPNMNR + 1))]>;I;"
done
sed "$MACMASKSED /\([[:alnum:]]\{2\}:\)\{6,\}/! s/\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}/<MAC address>/" <<< "$RESULTS" > "$OUTPUTDIR/$FILEBASE.txt"
##### The End #####
dialog_info "${TERMOUT+\n}Results saved in \"$OUTPUTDIR/$FILEBASE.txt\".${TERMOUT+\n}"
if (( $(stat -c %s "$OUTPUTDIR/$FILEBASE.txt") > 19968 )); then
tar -czf "$OUTPUTDIR/$FILEBASE.tar.gz" -C "$OUTPUTDIR" "$FILEBASE.txt" && \
dialog_info "Results also archived in \"$OUTPUTDIR/$FILEBASE.tar.gz\",${DIALOGBREAK}as they exceed the 19.5 kB size limit for \".txt\" attachments${DIALOGBREAK}on the Ubuntu Forums.${TERMOUT+\n}" || \
dialog_error "Results exceed the 19.5 kB size limit for \".txt\" attachments${DIALOGBREAK}on the Ubuntu Forums, but archive could not be created.${TERMOUT+\n}"
fi
if [ -x /usr/bin/pastebinit ] && ping -nc 3 -w 6 -i 0.2 paste.ubuntu.com > /dev/null 2>&1; then
PASTEBIN=$(dialog_question "Do you also want to post them${DIALOGBREAK}to your default 'pastebinit' provider?")
if [[ ! $PASTEBIN =~ ^no?$ ]]; then
PASTERESULT=$(pastebinit -i "$OUTPUTDIR/$FILEBASE.txt" -f text 2>&1) && PASTESUCCESS="yes"
if [ "$PASTESUCCESS" = "yes" ]; then
dialog_info "${TERMOUT+\n}Pastebin successful:\n\n${PASTERESULT}${TERMOUT+\n}"
else
if [ -n "$PASTERESULT" ]; then
dialog_error "${TERMOUT+\n}Pastebin failed, error message is:\n\n${PASTERESULT}${TERMOUT+\n}"
else
dialog_error "${TERMOUT+\n}Pastebin failed, no error message given.${TERMOUT+\n}"
fi
fi
else
echo
fi
fi
Ergebnis
dan@Pavilion:~$ sudo ./sudoWIFI.sh
[sudo] password for dan:
cd hal/OUTSRC/ ; rm -fr */*.mod.c */*.mod */*.o */.*.cmd */*.ko
cd hal/OUTSRC/ ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd hal/led ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd hal ; rm -fr */*/*.mod.c */*/*.mod */*/*.o */*/.*.cmd */*/*.ko
cd hal ; rm -fr */*.mod.c */*.mod */*.o */.*.cmd */*.ko
cd hal ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd core/efuse ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd core ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep/linux ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd platform ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
rm -fr Module.symvers ; rm -fr Module.markers ; rm -fr modules.order
rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
rm -fr .tmp_versions
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.13.0-32-generic/build M=/home/dan/rtl8812AU modules
make[1]: Entering directory '/usr/src/linux-headers-4.13.0-32-generic'
CC [M] /home/dan/rtl8812AU/core/rtw_cmd.o
In file included from /home/dan/rtl8812AU/include/drv_types.h:32:0,
from /home/dan/rtl8812AU/core/rtw_cmd.c:22:
/home/dan/rtl8812AU/include/osdep_service.h: In function ‘thread_enter’:
/home/dan/rtl8812AU/include/osdep_service.h:343:2: error: implicit declaration of function ‘allow_signal’ [-Werror=implicit-function-declaration]
allow_signal(SIGTERM);
^
/home/dan/rtl8812AU/include/osdep_service.h: In function ‘flush_signals_thread’:
/home/dan/rtl8812AU/include/osdep_service.h:353:6: error: implicit declaration of function ‘signal_pending’ [-Werror=implicit-function-declaration]
if (signal_pending (current))
^
/home/dan/rtl8812AU/include/osdep_service.h:355:3: error: implicit declaration of function ‘flush_signals’ [-Werror=implicit-function-declaration]
flush_signals(current);
^
cc1: some warnings being treated as errors
scripts/Makefile.build:308: recipe for target '/home/dan/rtl8812AU/core/rtw_cmd.o' failed
make[2]: *** [/home/dan/rtl8812AU/core/rtw_cmd.o] Error 1
Makefile:1550: recipe for target '_module_/home/dan/rtl8812AU' failed
make[1]: *** [_module_/home/dan/rtl8812AU] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.13.0-32-generic'
Makefile:1576: recipe for target 'modules' failed
make: *** [modules] Error 2
install -p -m 644 8812au.ko /lib/modules/4.13.0-32-generic/kernel/drivers/net/wireless/
install: cannot stat '8812au.ko': No such file or directory
Makefile:1582: recipe for target 'install' failed
make: *** [install] Error 1
modprobe: FATAL: Module 8812au not found in directory /lib/modules/4.13.0-32-generic
Antwort1
Ich schlage vor, dass Sie den Vorgang in meiner Antwort hier durchführen:Probleme mit dem RTL8812AU USB-AdaptertreiberEs lässt sich ohne Fehler im Kernel 4.13.0-32 und höchstwahrscheinlich auch in neueren Versionen kompilieren und installieren. Auf meinem eigenen System mit genau demselben Kernel ließ es sich problemlos installieren.
Denn es nutzt diedkmsProzess, es muss nach Kernel-Upgrades nicht erneut installiert werden.