%3F.png)
Heute hat das WLAN meines Laptops plötzlich aufgehört zu funktionieren. Ich wollte die Verbindung überprüfen und es gab kein WLAN-Symbol zum Auswählen. In den Einstellungen steht nur „Kein WLAN-Adapter gefunden“. Der lspci
Befehl gibt Folgendes zurück:
codyp@codys-inspiron:~$ lspci 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07) 00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 08) 00:13.0 Non-VGA unclassified device: Intel Corporation Sunrise Point-LP Integrated Sensor Hub (rev 21) 00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21) 00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21) 00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21) 00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1) 00:1f.0 ISA bridge: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E (rev 21) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21) 00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21) 00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
Aber ich habe keine Erfahrung mit Ubuntu und keine Ahnung, wonach ich suche. Warum sollte es überhaupt verschwinden? Im Moment habe ich Internet über Ethernet. Der sudo lshw -C network
Befehl gibt Folgendes aus (ich nehme an, ich sollte auch ein drahtloses Netzwerk aufgelistet sehen, aber das ist nicht der Fall):
*-network
description: Ethernet interface
physical id: 2
logical name: enx00000006776a
serial: 00:00:00:06:77:6a
size: 100Mbit/s
capacity: 100Mbit/s
capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=asix driverversion=22-Dec-2011 duplex=full firmware=ASIX AX88772B USB 2.0 Ethernet ip=192.168.86.200 link=yes multicast=yes port=MII speed=100Mbit/s
Und das ist von ifconfig
:
inet 192.168.86.200 netmask 255.255.255.0 broadcast 192.168.86.255
inet6 fe80::409:f5be:cd2e:92e3 prefixlen 64 scopeid 0x20<link>
ether 00:00:00:06:77:6a txqueuelen 1000 (Ethernet)
RX packets 6217 bytes 6523352 (6.5 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4303 bytes 604422 (604.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 1447 bytes 129014 (129.0 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1447 bytes 129014 (129.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Bitte sagen Sie mir, ob das zu beheben ist, ich habe diesen Laptop gerade erst gekauft. Gibt es eine Möglichkeit, den Treiber einfach neu zu installieren? Vielen Dank im Voraus!
Antwort1
Mein WLAN-Adapter scheint ganz zufällig zu verschwinden, wenn ich meinen Computer in den Ruhezustand versetze und wieder aufwecke. Aber das war jedes Mal eine sichere Lösung:
- Rufen Sie das BIOS auf
- Klicken Sie auf die WLAN-Einstellungen auf der linken Seite des Bildschirms
- Klicken Sie auf „BIOS-Einstellungen wiederherstellen“.
- Starte den Computer neu