저는 Ubuntu 16.04 Mate를 사용하고 있습니다.
sudo openvpn --config client.ovpn
결과
초기화 시퀀스가 완료되었습니다.
오류가 있는
Tue May 30 23:54:41 2017 /sbin/ip link set dev tun0 up mtu 1500
Tue May 30 23:54:41 2017 /sbin/ip addr add dev tun0 10.10.10.3/24 broadcast 10.10.10.255
Tue May 30 23:54:45 2017 /sbin/ip route add 188.93.88.146/32 via 192.168.0.1
Tue May 30 23:54:45 2017 /sbin/ip route add 10.1.1.0/24 via 10.10.10.1
Tue May 30 23:54:45 2017 /sbin/ip route add 10.1.1.1/32 via 10.10.10.1
Tue May 30 23:54:45 2017 /sbin/ip route add 10.1.1.2/32 via 10.10.10.1
Tue May 30 23:54:45 2017 /sbin/ip route add 10.1.1.1/32 via 10.10.10.1
RTNETLINK answers: File exists
Tue May 30 23:54:45 2017 ERROR: Linux route add command failed: external program exited with error status: 2
Tue May 30 23:54:45 2017 /sbin/ip route add 188.93.88.146/32 via 192.168.0.1
RTNETLINK answers: File exists
Tue May 30 23:54:45 2017 ERROR: Linux route add command failed: external program exited with error status: 2
Tue May 30 23:54:45 2017 Initialization Sequence Completed
/etc/network/interfaces
처럼 보인다
auto lo
iface lo inet loopback
$ ip link show
결과
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp8s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 34:64:a9:bf:10:da brd ff:ff:ff:ff:ff:ff
3: wlo1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether 10:08:b1:1f:3c:77 brd ff:ff:ff:ff:ff:ff
$ route
결과
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.0.1 0.0.0.0 UG 600 0 0 wlo1
link-local * 255.255.0.0 U 1000 0 0 wlo1
192.168.0.0 * 255.255.255.0 U 600 0 0 wlo1
나는 시도했다
$ sudo ip addr flush dev wlo1
$ sudo ip addr flush dev enp8s0
다시 시작해도 openvpn에 연결할 때 오류가 계속 발생합니다.
답변1
파일 route remote_host 255.255.255.255 net_gateway
에서 삭제했습니다client.ovpn
답변2
/sbin/ip route add 10.1.1.1/32 via 10.10.10.1
둘 /sbin/ip route add 188.93.88.146/32 via 192.168.0.1
다 이전 줄에서 실행되어 File Exists
오류가 발생합니다. 중복 항목을 제거하면 문제가 해결될 것입니다.