
Вот журнал
Cisco Systems VPN Client Version 5.0.07.0410 Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 6.2.9200 Config file directory: C:\Program Files\Cisco Systems\VPN Client\
1. 09:53:33.418 12/09/15 Sev=Warning/3 CVPND/0xE340000C The Client
was unable to enable the Virtual Adapter because it could not open
the device.
2. 09:53:33.433 12/09/15 Sev=Warning/3 CVPND/0xE340000C The Client
was unable to enable the Virtual Adapter because it could not open
the device.
3. 09:53:33.433 12/09/15 Sev=Warning/2 IKE/0xE300009B Failed to
active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
4. 09:53:33.433 12/09/15 Sev=Warning/2 IKE/0xE30000A7 Unexpected SW
error occurred while processing Quick Mode
negotiator:(Navigator:2263)
Любая помощь приветствуется.
решение1
решение2
Решение 1: После небольшого исследования и получения информации от другого сообщества было обнаружено, что Cisco VPN записывает неверные значения в раздел реестра для строки DisplayName.
Чтобы устранить проблему, нам следует изменить значение на следующее: Откройте редактор реестра [из Windows Run введите regedit] и перейдите в папку: HKLM\SYSTEM\CurrentControlSet\Services\CVirtA
For x86, change the value data from "@oem8.inf,%CVirtA_Desc%;Cisco Systems VPN Adapter" to "Cisco Systems VPN Adapter"
For x64, change the value data from "@oem8.inf,%CVirtA_Desc%;Cisco Systems VPN Adapter for 64-bit Windows" to "Cisco Systems VPN Adapter for 64-bit Windows"
Теперь попробуйте подключиться к VPN, и все должно работать без проблем.